רמקול שקוע עגול “8 עם שנאי קו AST R-8

TT

פרטים נוספים
רמקול תקרתי/קיר עגול “8, AST R8

R-8
Specifications
• Dimensions (DIA x D): Ø 260*110mm.
• Cutout size: 227mm.
• Woofer: 8” polypropylene.
• Tweeter: 1” dome.
• Impedance: 8 Ohms.
• Power: 10/20/30W (100V).
• Frequency response: 50Hz – 20kHz.
• Sensitivity: 90dB.
• Weight: 2.1kg.

Installation Instructions
• When cutting the mounting hole for the speaker, make sure there is
sufficient clearance behind the panel (no obstructions like A/C
channels power lines etc.).
• Ensure that the speakers are installed on a surface sturdy
enough to support their weight. Fasten properly and securely.
• Take into account the targeted listening area and potential
safety hazards when choosing speaker installation and
location.
• Please refer to the following illustration for assembly and
installation instruction.
Installation Diagram
1. Use the cutout template to mark the mounting hole.
2. When making the hole in your mounting panel, double check
if there are no cables or any other obstructions behind the
mounting panel. Cutting the mounting panel without this
check might result in damaged infrastructure or power lines.
3. Remove the front grille.
4. Connect the speaker wires and insert the speaker in the
precut speaker opening.
5. Use a standard x-screwdriver to fasten the locking screws
carefully until the speaker sits safely in place. Try to tighten
each screw equally, but be careful not to over-tighten them.
6. Place the grille over the speaker frame.