רמקול מוגבר ימהה YAMAHA DHR15

D

Featuring a plywood cabinet that delivers a clear sound with minimal vibration.
Plywood enclosure with a polyurea coating for a robust, scratch resistant surface.
Compact size despite the 15-inch LF driver that provides excellent low frequency response.
Dual-angle pole sockets offer both 0° or a -7° down tilt.
Rigging points for use with eye bolts.
Propitiatory FIR-X™ tuning, provides FIR filtering and corrective EQ, minimizing phase distortion.

DHR15
Frequency range (-10dB): 44 Hz – 20 kHz
Coverage area: H90ﾟ x V60ﾟ
Crossover: 1.8 kHz: FIR-X tuning™ (linear phase FIR filter)
Maximum Output Level (Measured peak, IEC noise@1m): 131 dB SPL
Components:
LF Diameter: 15″ cone, Voice Coil: 2.5″, Magnet: Ferrite
HF Diaphragm: 1.4″, Type: 1″ throat compression driver, Magnet: Ferrite
Amplifier class: Class-D
Power rating:
Dynamic: 1,000 W (LF: 800 W, HF: 200 W) *1
Continuous: 465 W (LF: 400 W, HF: 65 W)
Cooling: Fan cooling, 4 speeds
Power consumption: 74 W (1/8power), 18 W (Idle)
Power requirements: 100 V, 100-120 V, 220-240 V, 110/127/220 V (Brazil), 50/60 Hz
A/D D/A Converters: 24 bit 48 kHz Sampling
Processors: HPF: OFF, 100 Hz, 120 Hz, 24 dB/Oct.; D-CONTOUR: FOH/MAIN, MONITOR, OFF
I/O connectors: INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)
Cabinet material Plywood
Finish: Durable Polyurea Painting, Black
Handle: Side x2
Pole socket: Φ35 mm x2 (Bottom, 0° or -7°)
Rigging: Top x 2, Rear x 1 (Fit for M10 x 30 – 50 mm Eyebolts)
Floor Monitor Angle –
Dimensions
W 432 mm (17.0″)
H 692 mm (27.2″) (with rubber feet)
D 405 mm (15.9″)
Net weight 24.0 kg (52.9 lbs)