קונטרולר PreSonus StudioLive CS18AI

FL-D

StudioLive CS18AI
Features
18 100mm, touch-sensitive motorized faders: 16 Channel, 1 Flex, 1 Master
Control StudioLive® RM AI mix systems of up to 64-channels
Full PreSonus Fat Channel DSP control with individual encoders and 12-LED displays for
Gate Threshold, Range, Attack, Release
Compressor Ratio, Attach, Release, Gain
Limiter Threshold
EQ Low, Low-Mid, High-Mid, High
Metering
Sixteen 12-LED channel ladder level and Fat Channel displays
Three 11-LED Select Channel Level/Compressor/Gate displays
11-LED displays for Main Center/Mono, Left and Right
Variable-color (RGB) Select buttons for easy channel and Filter DCA group identification
16-channels of high resolution 64 x 96 scribble strip display with Pan indicators
4.3” / 109 mm color touch-sensitive display
Compressor
EQ
Gate
Effects, Scenes, Markers Edit
Audio Routing
Channel Presets and settings
Talkback Assign
4 Effects Mute/Mix button with TAP
Navigate using traditional layers or with intuitive PreSonus Filter DCA groups
Active Integration with PreSonus software includes UC Surface software
Studio One 3 control surface functionality including: touch-sensitive motorized fader control over channel faders and automation, plug-in control for PreSonus and third-party plug-ins, Channel Mute, Channel Solo and Solo clear, Channel Select, Channel Pan control, Scribble strip names, pan indication, and current automation mode, channel layer navigation, Aux mix and transport control, Automation mode selection, metering
4×2 AVB audio transport control with Marker Shift, REW/FF options
Analog I/O
2 remote XMAX mic preamps for talkback, room mic or other local inputs
2 balanced 1/4” TRS line inputs
2 XLR line outputs
stereo headphone output with level control
Monitor control level control
4-pin XLR lamp connection
Footswitch input
Silent internal PSU with no fans
Same footprint as StudioLive 16.4.2AI for integration in 19” rack mounts and third-party studio desks
Optional iPad® mount accessory

Computer system requirements:
Below are the minimum computer-system requirements for UC Surface, QMix-UC, and Studio One®.

Mac
Mac® OS X 10.8.5 64-bit or later
Intel® Core™ 2 Duo processor (Intel Core i3 or faster recommended)
4 GB RAM (8 GB or more recommended)

Windows
Windows® 7 x64/x86 SP1 + platform update, Windows 8.1 x64/x86, Windows 10 x64/x86
Intel Core 2 Duo (Intel Core i3 or faster recommended)
4 GB RAM (8 GB or more recommended)

Mac and Windows Systems
USB 2.0 port
Internet connection
Internal or external 7200 RPM storage drive highly recommended
30 GB hard disk space
Monitor with 1366×768 resolution

iOS
iOS 9.3 or later
iPad Pro, iPad Air 2, iPad Air, iPad mini 4, iPad mini with Retina display, iPad (4th generation), iPad mini, iPad (3rd generation), iPad 2

Android
Android™ 5.0 (Lollipop) or later
Android smartphone (QMix-UC)
Android tablet (8-inch) with 1024×768 resolution (UC Surface)
Note: The minimum system requirements may differ for DAWs other than Studio One. Please check the requirements for your DAW of choice with its manufacturer.

Note that the speed of your processor, amount of RAM and size and speed of your hard drive will greatly affect the overall performance of your recording system. Also, a more powerful system (faster processor with more RAM) will allow for lower latency (signal delay) than you might experience while monitoring audio signals.

Technical Specifications
Network
Type Ethernet / AVB

Microphone Inputs
Type XLR Female (via Combo), Balanced Remote
Maximum Input Level +12 dBu, ±0.5 dB, Unity Gain
Gain Control Range 65 dB, ±1 dB
Gain 0 to +65 dB, ±1 dB
Frequency Response to Main Output 20 Hz-20 kHz, ±0.5 dBu
Frequency Response (A-D) 10 Hz to 40 kHz, ±0.2 dB
Input Impedance 1 kΩ
THD to Main Output <0.005% max, +4 dBu, 20 Hz-20 kHz, unity gain, unwtd
THD+N (min. gain, a-wtd) < 0.005%
Dynamic Range (min. gain, a-wtd) > 114 dB
Dynamic Range (mid. gain, unwtd) > 105 dB
Signal-to-Noise Ratio to Main Output 94 dB
Common Mode Rejection 65 dB (1 kHz, unity gain)
EIN (+55 dB gain, 150Ω input, 20 Hz-22 kHz, a-wtd) < 128 dBu
Phantom Power +48 V (±2 V, > 8 mA per channel)

Line Inputs
Type ¼” TRS Female (via Combo), Balanced
Maximum Input Level +18 dBu
Frequency Response (A-D) 20 Hz to 20 kHz, ±0.2 dB
Frequency Response to Main Out 20 Hz to 20 kHz, ±0.5 dBu
THD to Main Output <0.005% max, +4 dBu, 20 Hz-20 kHz, unity gain, unwtd
THD+N (1 kHz, -1 dBFS, a-wtd) < 0.005%
Input Impedance 10 kΩ
Signal-to-Noise Ratio to Main Output 94 dB
Max Input Level +18 dBu
Dynamic Range (min. gain, a-wtd) > 114 dB
Dynamic Range (mid. gain, unwtd) > 105 dB
Crosstalk (1 kHz, channel-to-channel) < -80 dB

Physical
Length 22.35″ (58.6 cm)
Width (chassis only) 17.22″ (43.74 cm)
Maximum Height 6.9″ (17.53 cm)
Weight 23 lbs. (10.43 kg)

Monitor Line Outputs
Type XLR Male, Electrically Balanced
Maximum Output Level +24 dBu, ±0.5
Frequency Response 20 Hz to 20 kHz, ±0.2 dB
Dynamic Range (a-wtd) > 112 dB
THD+N (1 kHz, -1 dBFS, un-wtd) < 0.005%
Output Impedance 100Ω
Crosstalk (1 kHz, channel-to-channel) < -80 dB

Headphone Outputs
Type ¼” TRS Female, Stereo, Unbalanced
Maximum Output Level 120 mW/channel @ 60 Ω
Frequency Response 20 Hz to 20 kHz, ±0.5 dB
Dynamic Range (a-wtd) > 103 dB
THD+N 0.01%, 1 kHz, max gain, 20 Hz BW, unwt
Crosstalk (1 kHz, channel-to-channel) < -80 dB
Signal-to-Noise Ratio 96 dB 1kHz, max gain, 20 kHz BW, unwtd

System Crosstalk
Input to Output -90 dBu +4 dBu, 20 Hz-20 kHz, unwtd
Adjacent Channels -87 dBu +4 dBu, 20 Hz-20 kHz, unwtd

Digital Audio
ADC Dynamic Range 118 dB min (A-wtd, 48 kHz)
DAC Dynamic Range 118 dB min (A-wtd, 48 kHz)
Sample Rate 44.1, 48 kHz
Reference Level for 0 dBFS +18 dBu

Clock
Clock Jitter <20 Ps RMS, 20 Hz-20 kHz
Jitter Attenuation >60 dB 1 ns in ~1 ps out

Power / Environmental
Connector IEC
Input-Voltage Range 100 to 230V, 50-60 Hz
Power Requirements 200W
Temperature Range 0˚ to 40˚ Celsius / 32˚ to 104˚ Fahrenheit

NOTE: As a commitment to constant improvement, PreSonus Audio Electronics, Inc., reserves the right to change any specification stated herein at any time, without notification.