קומפרסור / אקספנדר / גייט / לימיטר 2 ערוצים ברינגר BEHRINGER MDX2600 V2

TT-D

פרטים נוספים
BEHRINGER 2 קומפרסור MDX2600 COMPOSER PRO-XL

Reference-Class 2-Channel Expander/Gate/Compressor/Peak Limiter with Integrated De-Esser, Dynamic Enhancer and Tube Simulation

Switchable IKA (Interactive Knee Adaptation) program-adaptive compression circuitry combines the advantages of hard-knee and soft-knee characteristics

Integrated De-esser with switchable male/female voice recognition removes excessive sibilance from your vocal tracks

IGC (Interactive Gain Control) peak limiting circuitry combines clipper and program limiter for reliable and inaudible protection against signal peaks

Switchable dynamic Enhancer for brilliant, lively audio even with heavy compression

IRC (Interactive Ratio Control) expander/gate circuitry for virtually inaudible noise suppression

Switchable Tube simulation for the extra warmth and transparency of classic tube circuitry

Automatically or manually adjustable attack and release times

Switchable Low contour filter prevents “pumping” due to low-frequency dominated compression

Stereo couple function with independent output level settings

Switchable side chain input with monitor function

Separate 12-segment LED meters for input/output levels and gain reduction

Dedicated “traffic light” Threshold and De-esser level displays

Servo-balanced inputs and outputs with ¼” TRS and gold-plated XLR connectors

Relay-controlled hard bypass switch with auto bypass function in case of power failure

Internal switch-mode power supply (100 – 240 V~) for noise-free audio and low power consumption

Audio Inputs
Type:XLR and 1/4″ TRS connectors, servo-balanced

Impedance
+4 dBu:50 kΩ balanced, 50 kΩ unbalalanced @ 1 kHz
-10 dBV:50 kΩ balanced, 100 kΩ unbalanced @ 1 kHz
Operating Level:+4 dBu / -10 dBV, switchable
Max. input level:+22 dBu, balanced and unbalanced
CMRR:Typically 60 dB @ 1 kHz

Audio Outputs
Type:XLR and 1/4″ TRS connectors, servo-balanced
Impedance:100 Ω balanced, 50 Ω unbalanced @ 1 kHz
Max. output level:+21 dBu, balanced and unbalanced

Sidechain Inputs
Type:1/4″ TS connector, unbalanced
Impedance:10 kΩ
Max. input level:+20 dBu

Sidechain Outputs
Type:1/4″ TS connector, unbalanced
Impedance:50 Ω
Max. output level:+21 dBu

System Specifications
Frequency range:10 Hz to 70 kHz, +0/-3 dB
S/N ratio:115 dB, unweighted
THD:0.02% typ. @ +4 dBu, 1 kHz, unity gain
Crosstalk:-90 dB @ 1 kHz

Expander / Gate Section
Type:IRC (Interactive Ratio Control) expander
Threshold:OFF to +10 dB, variable
Ratio:1:1 to 1:8, variable
Attack:< 1 msec / 50 dB, program-dependent
Release:
SLOW: 100 msec/1 dB
FAST: 100 msec/100 dB, variable

Compressor Section
Type:IKA (Interactive Knee Adaptation) compressor
Threshold:-40 to +20 dB, variable
Ratio:1:1 to ∞:1, variable
Attack / release:Manual or automatic, variable
Manual attack time:0.3 msec/20 dB to 300 msec/20 dB, variable
Manual release time:0.05 sec/20 dB to 5 sec/20 dB, variable
Auto characteristic:Wave adaptive compressor
Auto attack time:Typically 15 msec for 10 dB, 5 msec for 20 dB, 3 msec for 30 dB
Auto release time:Typically 125 dB/sec, program-dependent
Output:-20 to +20 dB, variable

Peak Limiter Section
Type:IGC (Interactive Gain Control) peak limiter
Level:0 dB to OFF (+21 dBu), variable
Level 1 limiter type:Clipper
Attack:“Zero”
Release:“Zero”
Level 2 limiter type:Program limiter
Attack:Typically <5 msec, program-dependent
Release:Typically 20 dB/sec, program-dependent

Dynamic Enhancer Section
Type:IDE (Interactive Dynamic Enhancer)
Filter frequency:2.5 kHz (lower cut-off frequency)
Characteristic:High-pass filter (6 dB/oct.)
Boost:Max. 28 dB @ 7.5 kHz

De-Esser Section
Type:VAD (Voice-Adaptive De-Esser)
Filter Frequencies:8.6 kHz (Female), 7.5 kHz (Male)
Filter bandwidth:Program-dependent
Level reduction:Max. 15 dB

Power Supply, Voltage, Current Consumption
Switch mode power supply:Autorange, 100-240 V~ 50/60 H
Power consumption:15 W
Mains connector:Standard IEC receptacle

Dimensions / Weight
Dimensions (H x W x D):44 x 483 x 149 mm
Weight:1.7 kg