מיקרופון דיגיטלי מתקדם לגיטרה אקוסטית IK Multimedia iRig Acoustic Stage

Your acoustic’s true tone, anywhere

Advanced MEMS microphone clips on to sound hole

Preamp/DSP unit

Dramatically improves your live acoustic sound

1/4″ AUX input with volume for piezo, magnetic pickups or other onboard electronics

1/4″ Output with level control for amplifier or PA system

USB audio out for recording on a computer or mobile device

Cancel Feedback with multiple frequency feedback cancelling

6 tone presets

Personal instrument calibration

Works on any acoustic, acoustic electric or ukulele with round sound hole

Phase switch for optimizing dual source sound

iRig Acoustic Stage Specifications

Dedicated iRig Acoustic Microphone

Microphone Type: MEMS

Polar Pattern: omnidirectional

Frequency Response: 30 Hz – 20 kHz, +/-3dB

Max SPL: 130dB SPL

Signal-to-Noise Ratio: 101 dBA

Maximum soundboard thickness: 4mm / 0.16″

Dedicated iRig Acoustic Microphone Input: 2.5mm / 3/32″ TS mono jack

AUX Instrument Input Connector: 6.3mm / 1/4″ TS mono jack

AUX Instrument Input Impedance: 1 MOhms

Analog Output Connector: 6.3mm / 1/4″ TS mono jack, line-level, low impedance

Analog Output Impedance: 50 Ohms (can drive long cables without any loss)

Digital Output Connector: micro-USB

AD and DA Resolution: 32-bit

Sampling Rate: 48 kHz

Interface Output: USB class compliant audio output via micro-USB port

Power: battery power (2xAA), USB bus power

Battery Life: approximatively 12 hours of continuous usage with alkaline batteries and 15 hours with rechargeable high quality Ni-MH AA cells (2000 mAh and up)

iRig Acoustic Stage DSP/interface

iDedicated iRig Acoustic microphone

iBelt clip

iCarrying case

i2 x 1.5V AA Battery

DSP/Interface size: 101mm/3.98″ x 72.3mm/2.85″ x 23mm/0.91″ (belt clip excluded)

DSP/Interface weight: 99g/3.49oz (batteries excluded)

Microphone size: 31.7mm/1.25″ x 32.2mm/1.27″ x 18.8mm/0.74″

Microphone weight: 20g/0.71oz

Microphone cable length: 150cm/59.1″