מערכת אלחוטית בוס BOSS WL-50 WIRELESS SYSTEM

FL-D

WIRELESS FREEDOM FOR PEDALBOARDS
With the WL-50, it’s never been easier to bring wireless freedom to your pedalboard. Driven by new BOSS technology, the WL-50 delivers premium sound and a plug-and-play experience that eliminates all the hassles normally associated with wireless systems. The stompbox-sized receiver fits right alongside your other pedals, and includes a docking port for charging the transmitter and automatically setting the best wireless connection. There’s even a handy DC output, allowing you to distribute power to multiple pedals on your board.
Once you experience the wireless independence provided by the WL-50, you’ll never go back to using a standard cable again! Setup is quick and simple, and you’re able to move about freely while playing at home, jamming with friends, and performing on stage. During sound check at a gig, you can listen to your tone out front and dial in the best sound for your audience. And with the ability to roam and interact with other musicians, your live shows will be more dynamic and entertaining than ever.

Plug-and-play wireless system in a stompbox-size format for pedalboards
Optimum wireless connection set automatically, with no complicated setup required
Newly developed BOSS technology delivers premium audio performance with rock-solid stability, ultra-low latency (2.3 ms), and 65-foot/20-meter range (line-of-sight propagation)*
Built-in rechargeable battery in transmitter provides up to 12 hours of continuous playing time
Plug the transmitter into the receiver’s docking port for charging and automatic wireless setup**
Selectable cable tone simulation options: short, long, and bypass
Receiver powered by optional PSA-S adaptor or two AA batteries
With PSA-S adaptor power, the receiver’s DC output can distribute power to one or more pedals using an optional PCS-20A daisy-chain cable
Spare WL-T Transmitter available separately

SPECIFICATIONS (RECEIVER)
Wireless Format:BOSS proprietary digital audio format
Wireless carrier frequency:2.4 GHz
Compatible Channels:14(May vary due to local conditions)
Transmission Range:65 feet line-of-sight(May vary due to local conditions)
Latency:2.3 ms
Dynamic Range:110 dB or greater
Frequency Response:20 Hz–20 kHz
Nominal Input Level:-10 dBu
Input Impedance:1 M ohm
Nominal Output Level:-10 dBu
Output Impedance:1 k ohm
Recommended Load Impedance:10 k ohms or greater
Controls:CABLE TONE switch (OFF/SHORT/LONG)
Indicators:POWER,RECEIVE
Connectors:
INPUT jack: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
TRANSMITTER jack: 1/4-inch TRS phone type
DC IN jack
DC OUT jack
Power Supply:Alkaline battery (AA, LR6) x 2
AC adaptor (sold separately)
Current Draw:During wireless operation: 60 mA
While charging transmitter: 320 m

* These figures will vary depending on the actual conditions of use.

Accessories:Owner’s Manual
Leaflet USING THE UNIT SAFELY
Transmitter
Rubber foot x 4
Alkaline battery (AA, LR6) x 2
An AC adaptor (PSA-S series) is required to charge the transmitter (WL-T).

Options (sold separately):AC adaptor: PSA-S series
Parallel DC cord: PCS-20A (DC Plug x8)

SIZE AND WEIGHT (RECEIVER)
Width:72 mm
2-7/8 inches
Depth:121 mm
4-13/16 inches
Height:56 mm
2-1/4 inches
Weight (including battery ):220 g
8 oz

SPECIFICATIONS (TRANSMITTER (WL-T))
Nominal Input Level:-10 dBu (1 M ohm)
Indicator:BATTERY
Connectors:Input plug: 1/4-inch TRS phone type
DC IN 5 V port: USB Micro-B type
Power Supply:Rechargeable lithium-ion battery
Supplied from the DC IN 5 V port
Current Draw:350m
ABattery charging time:Approximately 3 hours
Expected battery life under continuous use:Approximately 12 hours
* These figures will vary depending on the actual conditions of use.

SIZE AND WEIGHT (TRANSMITTER (WL-T))
Width:87 mm
Depth:22 mm
Height:36 mm
Weight:43 g