מיקרופון קונדנסר שטוח אודיו טכניקה AUDIO TECHNICA 851RBo

SHE-D

מיקרופון קונדנסר שטוח U-851RBo
מיקרופון קונסנדר שטוח בכיווניות OMNI עם זווית קליטה של 360°
מיועד לחדרי ישיבות, הגברת במה, טלוויזיה ועוד
מעגל הגנות UniGuard למניעת רעשי לוואי ממכשירים חיצוניים
כולל כבל באורך 7.6 מטר

Key Features
Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations
Superior off-axis rejection for maximum gain before feedback
PivotPoint rotating output connector allows cable to exit from either the rear or the bottom of the microphone
Small-diameter UniPoint element near boundary eliminates phase distortion and delivers clear, high-output performance
Available interchangeable elements permit angle of acceptance from 100° to 360°
UniGuard RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
Self-contained electronics eliminate need for external power module
Heavy die-cast case and non-slip silicone foam bottom pads minimize coupling of surface vibration to the microphone
Low-profile design with low-reflectance finish for minimum visibility
Threaded inserts on bottom of microphone allow it to be mounted with screws for increased security

Specifications
Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Omnidirectional
Frequency Response 20-20,000 Hz
Open Circuit Sensitivity -31 dB (28.2 mV) re 1V at 1 Pa
Impedance 50 ohms
Maximum Input Sound Level 132 dB SPL, 1 kHz at 1% T.H.D.
Low Frequency Roll Off 80 Hz, 18 dB/octave
Switches Flat, roll-off
Signal-to-Noise Ratio 73 dB, 1 kHz at 1 Pa, A-weighted
Phantom Power Requirements 11-52V DC, 4.4 mA
Weight 253 g
Dimensions 23.0 mm H x 83.9 mm W x 108.0 mm D
Output Connector Microphone: TB3M-type
Cable: 3-pin XLRM-type
Cable 7.6 m long, 3.2 mm diameter, 2-conductor, shielded cable with TA3F and XLRM connectors
Accessories Included Soft protective pouch