מיקרופון קונדנסר סטריאו אודיו טכניקה AUDIO TECHNICA AT-8022

SHE-D

With a compact, lightweight design, the AT822 is ideal for DAT recording as well as television, FM and field applications. The microphone is equipped with unbalanced outputs for use with readily available audio and video equipment. Its closely matched elements provide the spatial impact and realism of a live sound field. The mic offers excellent channel separation and switchable low-frequency roll-off

Ideal for DAT recording as well as television, FM and field applications
Compact, lightweight design is perfect for camera-mount use
Closely-matched elements provide the spatial impact and realism of a live sound field
Excellent channel separation
Switchable low-frequency roll-off
Includes a 1.7′ (0.5 m) cable (XLRF-type to stereo 3.5 mm mini-plug); and a 10′ (3 m) cable – XLRF-type to two mono 3.5 mm mini-plugs
Battery operation only

SPECIFICATIONS
ELEMENTS Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN X/Y Stereo
FREQUENCY RESPONSE 30-20,000 Hz
LOW FREQUENCY ROLL-OFF 150 Hz, 6 dB/octave
OPEN CIRCUIT SENSITIVITY -45 dB (5.6 mV) re 1V at 1 Pa
CHANNEL BALANCE <=2.5 dB
IMPEDANCE 200 ohms unbalanced
MAXIMUM INPUT SOUND LEVEL 125 dB SPL, 1 kHz at 1% T.H.D
DYNAMIC RANGE (typical) 101 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 70 dB, 1 kHz at 1 Pa
BATTERY TYPE 1.5V AA/UM3
Warning: The AT822 is designed for battery operation only. Do not attempt to use when phantom power is present. Possible damage to the microphone may result
BATTERY CURRENT / LIFE 1.2 mA / 1000 hours typical alkaline
SWITCH Off, flat, roll-off
WEIGHT 165 g
DIMENSIONS (197.0 mm) long (62.0 mm) maximum head width, (21.0 mm) body diameter
OUTPUT CONNECTOR Integral 3-pin XLRM-type
CABLES 1.7′ (0.5 m) long, 3-conductor, shielded, vinyl-jacketed, stereo cable with 3-pin XLRF-type connector at microphone end, 3.5 mm stereo mini plug at output end 10.0′ (3.0 m) long, 3-conductor, shielded, vinyl-jacketed, stereo cable with 3-pin XLRF-type connector at microphone end, two 3.5 mm mono mini plugs with 1/4″ phone plug adapters at output end
ACCESSORIES FURNISHED Gun-grip snap-in stand clamp for 5/8″-27 threaded stands; came