מוניטור אולפני PreSonus R65 V2

FL-D

Overview
Clarity is king – and with the R65 V2s, you’ll hear every single detail of your music – and no problematic trouble spots will escape your ear again! If you’re mixing or mastering high-resolution audio, the R65 V2 will ensure that you hear every nuance, thanks to its custom 6.8-inch Air Motion Transformer (AMT) tweeter that responds to the subtlest waveforms and the highest frequencies. You’ll hear all of the air and space that has become synonymous with high-resolution audiophile sessions. The AMT design also allows the R65 V2 to handle 8 to 13 times the projection area of more traditional tweeter designs – while its unique housing constrains this projection area strictly to the horizontal axis. The result is a very wide sweet spot with focused vertical dispersion – minimizing reflections from your desk, floor, or ceiling.

The 6.5-inch, custom coated, woven composite LF driver produces a more dynamic output than conventional designs, thanks to the rigid cone’s ability to maintain a more constant dispersion pattern across its frequency response range, resulting in transparent sound with reduced reflections. Biamped with 140W RMS of Class A/B power – 75 W driving the woofer and 45W driving the tweeter – the R65 V2 ranks among the most powerful monitor speakers in its category.

A set of four acoustic tuning controls allow you to tailor the R65 V2’s frequency response to compensate for the anomalies of nearly any mix environment – so you can expect predictable, consistent performance in the event you use them in more than one place.

Features
2-way active AMT tweeter design provides articulate high-frequency response, wide stereo imaging, and narrow vertical dispersion
Custom-designed, 6.8-inch2, AMT tweeter responds to the subtlest waveforms and the highest frequencies for audiophile-grade air and space
6.5-inch LF drivers provide transparent mid- and low-frequency reproduction for clean, punchy bass
Biamped, 140 W RMS (LF = 75 W, HF = 65 W) Class A/B power amplifier with switching power supply
Acoustic tuning controls (Low cut, Mid, High, Acoustic Space) compensate for room acoustics and placement

Specs
Accessories
Footswitch NA

Electronics
Input Impedance 20 kΩ Balanced, 10 kΩ Unbalanced
VoltageRequirements 100-240 VAC, 50-60 Hz

General
Color Black
Product Name R65 V2 Studio Monitor, Black
Series R

Hardware
Audio Controls:
Volume Range: A-Type Taper High-Frequency Control: +/- 6dB Shelf at 10kHz Mid-Frequency Control: +/- 6dB at 1kHz Low Cut: (Flat) 80Hz, or 100Hz Acoustic Space: (Flat) -2dB or -4dB
Cabinet Material Vinyl-Laminated, Medium-Density Fiberboard
HF Transducers AMT
LF Transducers 6.5″ Woven Composite

Measurements
Product Depth 10.3″ (26.16 cm)
Product Height 13″ (33 cm)
Product Width 8″ (20.3 cm)

Miscellaneous
Power Cable IEC
Protections:
RF Interference
Output-Current Limiting
Over-Temperature
Turn-On/Off Transient
Subsonic Filter
External Mains Fuse

Output
Monitor Signal To Noise Ratio >100 dB (A-Weighted)

Performance
Peak SPL 104 dB (at 1 Meter)

Speakers
Crossover Frequency 2.7 kHz