מגבר מיקסר 2x240W עם BT/USB ו-6 כניסות מיק/ליין+2 כניסות ליין LAB GRUPPEN CPA2402

TT

2 x 240 Watt Commercial Mixer Amplifier with 8 Inputs, Bluetooth Streaming, USB Media Player

Product Features
2 x 240 Watt mixer amplifier for commercial and industrial applications

Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter

6 mic/line inputs plus 2 line inputs each with individual volume controls and output routing

High-quality media playback via Bluetooth streaming

USB media player with intuitive LCD navigation to play audio files via USB stick

Individual front panel master volume and bass/treble controls for each output

Configurable priority and chime muting function for background music override

Direct drive, constant power technology for superior audio performance and reliability

GPI remote volume control using standard RJ-45 connector and Ethernet cable

Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings

Front panel power control button for direct access

Aux outputs for expansion to additional amplifiers

Rack-mountable 1U, 19″ enclosure with brackets for rack mounting

Euroblock type mic/line input and output connectors

Convection-cooled, fan-less amplifier technology for low noise

Specification

Maximum Output Power
4 or 8 Ω per channel:240 W

Number of Amplifier Channels
Number:2

Minimun Load Impedance
4 Ω mode:4 Ω
8 Ω mode:8 Ω
70 V output mode:20 Ω
100 V output mode:42 Ω

Audio Outputs
Amplifier output :4-pin Euroblock connector
Aux output:2 x 3-pin Euroblock connector
Aux output max level:4.88 V (16 dBu)

Audio Inputs
Mic/Line with priority/ ducking input:2 x 5-pin Euroblock connector (channel A, E)
Mic/Line with summed RCA:4 x 3-pin Euroblock connector, 6 x stereo RCA

Impedance:
Balanced mic/line: 20 kΩ
Unbalanced line and RCA: 10 kΩ

Input sensitivity for max amplifier output or max aux output level:
Mic: 0.038 V (-26 dBu)
Balanced: 1.23 V (+4 dBu)
RCA: 0.62 V (-2 dBu) each for mono sum RCA
Maximum input level:4.88 V (+16 dBu)
Microphone phantom voltage:48 V

Controls
Front:Power standby button, input and output gain control, tone controls – bass and treble, bluetooth audio controls
Rear:Load config – (4 Ω/8 Ω/70 V/100 V), switchable 80 Hz high-pass filter, mic/line switch, vox/ducking threshold control, phantom voltage, input routing (2-channel models only)

Tone Controls
Bass:±10 dB @ 100 Hz
Treble:±10 dB @ 10 kHz

Indicators
Power:On (blue), force standby (red), standby (yellow)
Inputs
Signal (green LED): >12.3 mV (-36 dBu)
Fault (red LED): Clip
Master
Signal (green LED): >-50 dBu
Fault (red LED): Overheat, DC fault, over current, etc

Bluetooth
Frequency range:2402 – 2480 MHz
Channel number:79
Bluetooth version:4.2
Reception range:Up to 15 m (45 ft)
Output power:10 dBm
Supported codec:SBC
Supported profiles:AVRCP 1.4, A2DP 1.2

USB Drive Requirements
Type:USB 2.0
Min capacity:1.0 GB
Min speed:12 MB/s read, 7 MB/s write
Supported file formats:AAC, WMA, MP3, WAV

System
Output circuit type:Class D
Remote connector:2 x RJ45 Ethernet connector

Performance
Distortion, 1/8 rated power:<0.5%
Frequency response:20 Hz to 20 kHz, +0.5/-2 dB
Crosstalk (2 channel models):>70 dB
Signal-to-noise:>95 dB
High-pass filter:80 Hz HPF

Circuit Protection
Cooling:Convection-cooled, fanless
Amplifier protection:Thermal protection, over current protection, DC protection
Load protection:Controlled start and shutdown behaviour, DC-fault protection

Power Supply, Voltage (Fuse)
Main voltage:100-240 V~, 50/60 Hz with active power factor correction
Fuse:T 10 A H 250 V
Power consumption 1/8th rated power @ 4 Ω:140 W
Mains connector:Standard IEC connector

Dimensions (H x W x D)
Dimensions (H x W x D):44 x 437 x 248 mm
Weight:3.6 kg
Finish:Brushed black anodized aluminum chassis with black painted steel bottom