רמקול 10″ מוגבר מקצועי תיבת עץ גרסה שחורה AUDAC VEXO110A/B

AB

רמקול 10″ מוגבר מקצועי תיבת עץ גרסה שחורה AUDAC VEXO110A/B
סדרת VEXO100A כוללת רמקולים קומפקטיים בביצועים גבוהים המורכבים מ-2 דרייברים 2-way אקטיביים או פאסיביים. הרמקול משלב וופר בתדרים נמוכים עם דרייבר בקוטר של 1.4 אינץ’ (בדגם VEXO108) או 1.7 אינץ’. שילוב זה מאפשר הפקת עוצמות קול גבוהות. הדגמים האקטיביים של סדרת VEXO נכנסים באופן אוטומטי למצב המתנה (Standby) כאשר אינם בשימוש, ניתן להשתמש ברמקולים גם בהתקנות קבועות, מבלי שיהיה צורך לכבות אותם לאחר כל שימוש. בעזרת מתקן Clever U Bracket (אופציונלי) ניתן להתקין את הרמקולים במאונך או במאוזן, עם אפשרות להטיה בין -90° ל-+35° . מתקן נוסף, MBK Bracket, מאפשר התקנת הרמקול על התקרה.

The VEXO1xx series are compact high performance 2-way loudspeakers and come in 5 different (active or passive) models. The low-frequency transducer, which is made out of high-quality materials, is combined with a 1.4 (VEXO106 & VEXO108) or 1.7” (VEXO110, VEXO112 & VEXO115) voice coil compression driver, enabling high sound pressure levels and a tight driver response with a rotatable 90° x 70° coverage pattern for a wide range of applications.

Thanks to the unique driver composition, the VEXO110A delivers a clear and natural sound with an continuous power of 300 Watts and a maximum power of 1200 Watt. The frequency response (±3dB) starts from 65Hz up to 20 kHz and the sensitivity (1W/1m) reaches 96dB while a maximum continuous sound pressure level from 121dB can be achieved.

When not in use, the active versions of the VEXO series devices automatically go into an energy-saving standby mode. This means that active versions can also be used in fixed installations, as there is no need to physically shut them down after each use.

The construction of the cabinets is made of 15 mm plywood with a polyurethane coating, making them resistant to any impact. The front side of the cabinet is finished with a powder-coated steel grill with acoustical foam. A recessed carry handle on the rear side makes carrying easy. Positioning and suspension of the speaker are easily achieved by using the standard 35 mm pole adapter on the bottom and the M10 rigging points. Two speaker connectors provide reliable connections with easy link-through to cabinets.

The optional Clever U bracket allows mounting the high power 2-way cabinet both horizontally and vertically. An inclination of -90° to +35° ensures an optimal positioning. The optional MBK bracket even allows mounting the VEXO series to the ceiling which gives the opportunity to install the loudspeaker cleanly in any environment.

By installing the optional ANI44XT Dante™ audio network interface in the active loudspeaker, the VEXO series can be integrated into any Dante enabled AV network and transfer digital audio with any compatible solution on the market.

When the ANI44XT is installed the VEXO series will be compatible with AUDAC Touch™ and TouchLink™. Used for creating virtual zones by linking multiple compatible devices with each other. In AUDAC Touch™ you can select multiple amplifier channels that should react to the user as one zone.

The VEXO110A features the unique WaveDynamics™ innovation. Due to this DSP processor, the audio control and processing technology enable any user to effortless control the most advanced acoustic configurations. The integrated DSP allows pre-sets for full-range, satellite and custom configurations and can be loaded via the USB slot on the back of the device. The AUDAC Touch™ application allows to equalize and create personalised presets and control the equipped VEXO loudspeakers. When installing the ANI44XT, all personalised presets and settings can be adjusted from anywhere at any time.

Technical specifications
Available models
VEXO110A/B Black version
VEXO110A/W White version

System specifications
Speaker type 2-way
Peak power handling 1200 W
Program power handling 600 W
Continuous power (AES) 300 W
Impedance 8 Ω
Sensitivity (1W/1m) 96 dB
Sound Pressure (Max. W/1m) 121 dB
Frequency Response (± 3 dB) 65 Hz – 20 kHz
Dispersion Horizontal 90°
Vertical 70°
Crossover Type Passive built-in
Drivers HF Compression driver with 1.7″ VC and 1″ throat
LF 10″ (2.5″ VC)
Connectors Remote control RJ45
Input 2 x Combo XLR / 6.3 mm jack
3-pin Euro Terminal Block (Pitch – 3.81 mm)
3-Pin terminal block (linkthrough)
XLR male (linkthrough)
Inputs USB port
RJ45 (Ethernet)
Power Consumption Standby 3.2 W
Idle 22.5 W
AC Inputs Voltage 110 ~ 240 V AC / 50 ~ 60 Hz

Product Features
Dimensions 329 x 540 x 345 mm (W x H x D)
Weight 18 kg
Construction 15 mm high-quality plywood
Finish Cabinet finishing Polyurethane coating
Front finish Powder coated steel grill with acoustical foam
Mounting & handling Rigging points 10 x M10
Stand fitting 35 mm pole adapter on bottom
Powerdrive mount Powerdrive type 75 (108 x 50,8 mm)
Mounting & handling Carry handles On top
Colours Black & White
Accessories Optional ANI44XT – Dante™/AES67 audio network interface
MBK110V Mounting bracket