מיקרופון לתופים אודיו טכניקה AUDIO TECHNICA ATM-350D

SHE-D

מיקרופון לתופים ATM-350D
המיקרופון המשובח לכלי נגינה בעיצוב מחודש עם תפס מיוחד Clip On לתופים.
קפסולה בכיווניות קרדיואיד עם כבל גמיש ומחבר מיוחד בקצה המתאים גם למשדר אלחוטי מסדרת אודיו טכניקה
תחום היענות 40Hz – 20kHz
התנגדות 200 אוהם
נצילות 159db
צוואר גמיש באורך 12.6 ס”מ הניתן להחלפה בדגם AT-8490L באורך 22.9 ס”מ
ספת מתח פאנטום למיקרופון
תיק נשיאה קשיח

ATM350D
Designed for use with drums, the ATM350D UniMount® mounting system gives you the tools to perform with confidence. The system features the ATM350a cardioid condenser microphone, a high-SPL mic that provides a clear, well-balanced response from any instrument.

When teamed with the included AT8491D drum mount and strong, flexible AT8490 5″ gooseneck, the mic can be securely fastened to the drum and positioned to stay where you want it. The drum mount’s unique spring-loaded mechanism clamps it tightly to a drum lug (without hindering your ability to adjust the lug) and provides excellent shock resistance for the mic; the gooseneck’s rigidity ensures that it won’t flop around no matter how aggressively you play. The microphone’s cardioid polar pattern isolates the instrument by reducing side and rear pickup, and the switchable 80 Hz high-pass filter on the in-line power module helps control undesired low-frequency noise. The system also includes an AT8468 violin mount with hook-and-loop fastener and a protective carrying case.

Features
Low-profile mic design for minimum visibilityCrisp, clear, well-balanced microphone response, even at high SPLs

Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source

UniMount® drum mount with unique spring-loaded mechanism attaches securely to a drum lug, and provides excellent shock resistance for the microphone

Rugged UniMount® 5″ gooseneck rigidly holds its shape, keeping microphone accurately positioned even during aggressive play

In-line power module is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noise

Interchangeable elements available for hypercardioid and omnidirectional polar patterns

Included violin mount with hook-and-loop fastener provides an additional mounting option

Specifications
Microphones
Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Cardioid
Frequency Response 40 – 20,000 Hz
Low Frequency Roll Off 80 Hz, 12 dB/octave
Open Circuit Sensitivity –49 dB (3.5 mV) re 1V at 1 Pa
Maximum Input Sound Level 159 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range 130 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 65 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11– 52V DC, 3.5 mA typical
Switches Flat, roll-off
Weight Microphone: 14.5 g
Powermodule: 90 g
Cable 4.0 m long (permanently attached to microphone), 3.2 mm diameter, 2-conductor shielded cable with HIROSE HR10-type connector
Dimensions Microphone:
37.8 mm long,
12.2 mm maximum body diameter

Powermodule:
92 mm long,
18.9 mm diameter
Output Connector Powermodule:
Integral 3-pin XLRM-type
Accessories Included ATM350a cardioid condenser microphone; AT8543 power module; AT8491D UniMount® drum mount; AT8490 UniMount® 5″ gooseneck; AT8468 violin mount (hook-and-loop fastener); protective carrying case