חזרה
מבצע!
LAB GRUPPEN

מגבר מיקסר 4 ערוצים בהספק 120 וואט LAB GRUPPEN CMA1201

1,825

עלות משלוח עד הבית:

₪0 או איסוף עצמי מהחנות ללא עלות

הערות מיוחדות למוצר

אתר דיאז הוא אתר קטלוגי לכלי נגינה מהגדולים בארץ ומכיל מעל 20,000 מוצרים! מומלץ לבדוק איתנו אם המוצר שרציתם נמצא במלאי
צור קשר >>

שנה אחריות
מבצע!
# דיאז #

TT

120 Watt Commercial Mixer Amplifier with 4 Inputs

Product Features
120 Watt mixer amplifier for commercial and industrial applications

Low-Z (4/8 Ohm) and High-Z (70/100 V) operation with switchable high-pass filter

4 mic/line inputs with individual volume controls

Energy efficient design conserves energy and reduces operational cost

Individual front panel master volume and bass/treble controls

Configurable priority muting function for background music override

Direct drive, constant power technology for superior audio performance and reliability

GPI remote volume control using standard RJ-45 connector and Ethernet cable

Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings

Front panel power control button for direct access

Aux output for expansion to additional amplifiers

Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting

Euroblock type mic/line input and output connectors

Convection-cooled, fan-less amplifier technology for low noise

Specification

Maximum Output Power
4 or 8 Ω per channel:120 W

Number of Amplifier Channels
Number:1

Minimun Load Impedance
4 Ω mode:4 Ω
8 Ω mode:8 Ω
70 V output mode:41 Ω
100 V output mode:82 Ω

Audio Outputs
Amplifier output:2-pin Euroblock connector, stereo
Aux output:3-pin Euroblock connector
Aux output max level:4.88 V (16 dBu)
Audio Inputs:Mic/Line with priority/ ducking input:1 x 5-pin Euroblock connector (channel A)

Mic/Line with summed RCA:3 x 3-pin Euroblock connector, 3 x stereo RCA (channel B, C, D)
Impedance:Balanced mic/line: 20 kΩ Unbalanced line and RCA: 10 kΩ
Input sensitivity for max amplifier output or nominal (+4 dBu) aux output level
Mic: 0.038 V (-26 dBu)
Balanced: 1.23 V (+4 dBu)
RCA: 0.62 V (-2 dBu) each for mono sum RCA
Maximum input level:4.88 V (+16 dBu)
Microphone phantom power:48 V
Controls
Front:Power standby button, input and output gain control, tone controls – bass and treble

Rear:Load config – (4 Ω / 8 Ω / 70 V / 100 V), switchable 80 Hz high-pass filter, mic/line switch, vox/ducking threshold control, phantom power, input routing (2-channel models only)

Tone Controls
Bass:±10 dB @ 100 Hz
Treble:±10 dB @ 10 kHz

Indicators
Power:On (blue), force standby (red), standby (yellow
Inputs
Signal (green LED):>12.3 mV (-36 dBu)
Fault (red LED):Clip
Master
Signal (green LED):>-50 dBu
Fault (red LED):Overheat, DC fault, over current, etc
Limit (red LED):Output limit

System
Output circuit type:Class D
Remote connector:1 x RJ45 Ethernet connector

Performance
Distortion, 1/8 rated power:<0.05%
Frequency response:20 Hz to 20 kHz, +0.5 / -1 dB
Crosstalk (2 channel models):>70 dB
Signal-to-noise:>97 dBA
High-pass filter:80 Hz HPF

Circuit Protection
Cooling:Convection-cooled, fanless
Amplifier protection:Thermal protection, over current protection, DC protection, high frequency protection
Load protection:Controlled start and shutdown behaviour, DC-fault protection

Power Supply, Voltage (Fuse)
Main voltage:100-240 V~, 50/60 Hz
Fuse:T 3.15 A L 250 V
Power consumption 1/8th rated power@ 4 Ω:50 W
Mains connector:Standard IEC connector

Dimensions / Weight
Dimensions (H x W x D)”:44 x 218 x 299 mm
Weight:2.4 kg
Finish:Brushed black anodized aluminum chassis with black painted steel bottom
Approvals:CE, CCC, WEEE, cTUVus, PSE, RCM, RoHS, FCC part 15 Class B

# דיאז #