רמקול מוגבר ימהה YAMAHA DHR10

D

The DHR10 is a 2-way bi-amp powered loudspeaker, equipped with a 10-inch woofer and a 1.4-inch HF driver, and perfect for use in fixed installations. Combining a 700W amplifier module and high-performance DSP with the same high-grade plywood construction found on Yamaha’s high-end DZR Series, the DHR10 offers best-in-class sound quality and durability.

Featuring a plywood cabinet that delivers a clear sound with minimal vibration
Plywood enclosure with a polyurea coating for a robust, scratch resistant surface
Compact appearance thanks to a 10-inch LF driver that provides excellent low frequency response
Can be installed in a horizontal or vertical configuration with a rotatable HF horn offering the flexibility needed for installation in a wide range of environments
Optional UB-DXRDHR10 U-bracket allows both for vertical or horizontal use
A pole socket for use on a stand
Rigging points for use with eye bolts
Proprietary FIR-X™ tuning, provides FIR filtering and corrective EQ, minimizing phase distortion

SPECS

Speaker Type:2-way, Bi-amped Powered Speaker, Bass-reflex
Frequency Range (-10dB):52Hz – 20,000Hz
Coverage Area (HxV):90° x 60° (rotatable)
Crossover:1.9 kHz: FIR-X tuning™ (linear phase FIR filter)
Max. Output Level (measured peak, IEC noise @1m):128 dB SPL

Components
LF:
Diameter: 10″ cone
Voice Coil: 2″
Magnet: ferrite
HF:
Diaphragm: 1.4″
Type: 1″ throat compression driver
Magnet: ferrite

Amplifier Class:Class D

Power Rating:
Dynamic: 700 W (LF: 500 W, HF: 200 W)
Continuous: 325 W (LF: 260 W, HF: 65 W)

Cooling:fan cooling, 4 speeds
Power Consumption:60 W (1/8 power), 18 W (Idle)
Power Requirements:100 V, 100-120 V, 220-240 V, 110/127/220 V (Brazil), 50/60 Hz
A/D D/A Converters:24 bit 48 kHz Sampling

Processors
HPF: OFF, 100 Hz, 120 Hz 24dB/Oct
D-CONTOUR: FOH/MAIN, MONITOR, OFF

I/O Connectors
INPUT1: Combo x1
INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced)
OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)

Cabinet Material: plywood
Finish; durable polyurea painting, black
Handle: top (1)
Pole Socket: Φ35 mm x1 (Bottom)
Rigging: Top x 2, Rear x 1 (Fit for M10 x 30 – 50 mm Eyebolts)
Dimensions: (WxHxD) 12″ x 19.5″ x 11.8″
Weight: 33.1 pounds